Zeiss KF 2 ICS Especificações descarregar pdf (Página 42)

100

Start-Up

Carl Zeiss Attaching colored disk carrier, polarizer or wide-angle unit Axiostar plus

2-20 B 40-815 e 12/01

1 Condenser carrier

2 Colored disk carrier

3 Stop bolt

4 Adjusting lever

5 Hexagonal key SW 2

6 Holding bolt

7 Slotted screwdriver

8 Wide angle unit or swiveling polarizer

Fig. 2-18 Attaching colored disk carrier, polarizer or

wide angle unit

2.9 Attaching colored disk carrier,

polarizer or wide-angle unit

The polarizer must be installed if you want to

use polarization contrast. The wide-angle unit

must be used with objectives having a

magnification < 4x so that the entire visible

field is illuminated.

• Hold colored disk carrier (2-18/2) parallel to

the underside of the condenser carrier

(2-18/1) and screw the holding bolts of the

colored disk carrier (2-18/6) into the front

thread on the bottom left of the condenser

carrier (2-18/1, position a) using the 90°-

offset hexagonal key SW 2 (2-18/5) until it

engages.

• Screw stop bolt (2-18/3) with adjusting lever

(2-18/4) into the rear thread on the

condenser carrier (2-18/1, position b) until it

engages.

• Screw wide-angle unit or swiveling polarizer

(2-18/8) with exceeding threaded bolt

(2-18/8, position a) into the front threaded

hole of the condenser carrier (2-18/1,

position a) by turning the entire wide-angle

unit (or the polarizer). Screw in the unit

until the threaded hole of the holding angle

(2-18/8 position b) lies below the rear

threaded hole (2-18/1, psition b) of the

condenser carrier and contacts the

underside of the condenser.

• Then use the slotted screwdriver to screw

the holding angle to the underside of the

condenser carrier (2-18/1, position b) with

the supplied slotted screw.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 99 100

Comentários a estes Manuais

Sem comentários

Zeiss KF 2 ICS Especificações Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Microscópios Zeiss KF 2 ICS